Type Of Product: Water-based Floor Cleaner
Percent Solids: 6.0 ± 0.5
Weight Per Gallon: 8.45 lbs
Appearance: Clear Yellow
pH: 8.0-9.0
V.O.C. Rating: Less Than 100 Grams Per Liter
Coverage: 500 Square Feet Per Gallon
Odor: Lemon

WF-10 Waterless Wood Floor Cleaner
2-gallon pail, 5-gallon pail
For use on wood floors that have been coated with solvent-based sealers or finishes. When used for routine floor maintenance, it removes wax, food stains and rubber burns without leaving a greasy film or residue. Also excellent for preparing gymnasiums, racquetball courts and similar wood floors prior to coating with solvent-based sealers or finishes.

Type Of Product: Waterless Wood Floor Cleaner
Percent Active: 100
Weight Per Gallon: 6.6 lbs
Appearance: Water White
Coverage: 500-600 Square Feet Per Gallon
Flash Point: Over 100°F
Odor: None

WF-80 Rinse-Free Neutral Floor Cleaner
6x1 gallon case, 5-gallon pail
A synthetic neutral cleaner concentrate formulated specifically for damp mopping and maintaining metal interlock floor finishes, waterborne urethane and oil-modified wood finishes. WF~80 thoroughly wets, emulsifies and suspends soil and residue caused by spills such as coffee, soft drinks, etc. without dulling the gloss of the finish. Excellent for use in automatic scrubbers. No rinsing required.

Type Of Product: Glycol Base Treatment
Percent Solids: 4.0 ± 0.5
Weight Per Gallon: 8.49 lbs
Appearance: Water White
pH: 6.0-7.0
Odor: Bananas

WF-50 Oil-Modified Urethane Finish
V.O.C. Compliant
2-gallon pail, 5-gallon pail.
Also available in satin.
Approved by Maple Flooring Manufacturers Association.
A high solids, oil-modified urethane formulation that meets V.O.C. requirements. Its light color brings out the natural grain and color of the wood while its tough, abrasive-resistant urethane polymers resist rubber marks, burns and dirt pick-up. WF~50 provides high gloss and excellent durability.

WF-25 Waterborne Urethane Finish
V.O.C. Compliant
4x1 gallon case, 2x2 1/2 gallon case
Also available in satin.
Approved by Maple Flooring Manufacturers Association.
A pre-catalyzed, water-based, urethane finish that is durable, non-yellowing and low odor. This product is non-flammable and meets V.O.C. requirements. An excellent finish for gymnasiums, racquetball courts, and other hard wood floors. May also be applied over solvent-based sealers.

The Vanguard Labor Saver is a multi-purpose applicator that can be used for conventional finishes and both oil-modified and waterborne urethane finishes.

The applicator includes: 2 Lambswool Pads • 2 Turan Pads • 1 64-oz Funnel with Filter Screen
The fold-down stand and funnel make it easy to fill the reservoir tank with no mess.
The PVC-base frame and applicator pads are equipped with Velcro strips for fast, simple assembly and disassembly.
The Turan pad can be attached to the applicator when "tacking" the floor or dustmopping.
The Vanguard Labor Saver is uniquely designed for use with the 24-inch lightweight bar and Nylfoam pad. It enables dispensing of product from reservoir tank through the manifold system, eliminating the need for a second person with a sprinkling can.

Labor Saver Accessories

WF-300 Vanguard Labor Saver Applicator
Includes 2 Lambswool Pads, 2 Turan Pads, 64-oz Funnel with Filter Screen

WF-305    Lambswool Pads    6/Case
For Waterborne Urethane and Oil-Modified Finishes

WF-310      Turan Pads    6/Case
For "tacking" surface, dust mopping, applying water-base finish

WF-320     24-Inch Lightweight Applicator Bar
For use with extension bar. Pads sold separately

WF-325     24-Inch Nylfoam Applicator Bar Pad
For use with either the Vanguard Labor Saver or Lightweight Applicator bar.

WF-330     20-Inch 100-Grit Sand Screen    10/Case
For screening the floor prior to recoating.